One key aspect in the operation of a vacuum pump is safety. Taking the proper precautionary measures can Vacuum_Truck_Salelead to increased performance and productivity. This vehicle can be very dangerous when used and can cause serious, sometimes even fatal injuries to workers as well as bystanders, including vacuumed limbs or breathing difficulties due to inhaled toxic substances. This is more likely to happen to operators lacking proper knowledge about the basic safety operation of this powerful vehicle. So before purchasing this type of vehicle from a vacuum truck sale, it is imperative to take the following precautionary measures in establishing a harm-free working environment.

Essential Characteristics

It is crucial to know about the following machine characteristics when the device is running.

  • Hose Size – The diameter size of the hose has various pressure gradients which affect the ability of the machine to vacuum materials; this causes a larger hose diameter to suction faster in comparison to a smaller hose.
  • Changing Hose Size – Do not attempt to alter the hose diameter during a job. Doing so can cause suction inefficiency, ruin the machine, and pose a great amount of danger to the worker. Friction loss is the worst enemy of an abrupt alteration in hose size.
  • Friction Influence – Increased friction loss can decrease the machine’s performance. The air pressure inside the pipe line is greatly influenced by the size of the diameter, length, and roughness of the inner surface. The larger the size of the pipe, the more pressure loss that is encountered.
  • Pipe Types – Smooth-bore pipes (rubber type) work better in comparison to corrugated pipes (drainage system). Always remember that friction also depends on the physical characteristics of the suctioning tube, such as a rough or textured surface.

Operational Safety

Vacuum truck safety can be achieved if reasonable care is taken by the operator. Following are a few simple points to consider when using this vehicle.

  • Cleaning – A vacuum tank that can be purchased from a vacuum truck sale is an enclosed space and when used to carry toxic waste, it is important not to get inside the tank for any post-cleaning operation. The fumes from any chemical residue left inside the tank could be inhaled and suffocate the worker.
  • Safety Release – Always use safety releases. There are three different types of these releases on vacuum trucks: remote, manual, and inline ‘T.’ Safety locks are standard on every vehicle; the inline ‘T’ is the most vital because it serves as an emergency shutdown switch in case of vacuum malfunctioning. To avoid serious injuries, all three locking devices should be functional.
  • Grounding – Static electricity can cause a dust explosion; therefore, all vehicles must be properly grounded.
  • Material Mixing – Do not mix wet and dry compounds in order to avoid an explosion due to a chemical reaction. It is essential to determine what type of material is being suctioned to avoid compromising safety.

General Safety

  • Masks – All drivers should wear masks to avoid exposure to toxic gases.
  • Hazard Identification – All workers should know how to identify all hazards in the work area, especially: what materials are being suctioned; evacuation procedures; and proper response in case of a toxic fume leak.
  • Buddy System – It is essential to use the “buddy system” so that one worker can replace another in case of fatigue or other problems.
  • Proper Usage – Consult the manufacturer’s manual for the designated use of these trucks.
  • Proper Inspection – Inspect the entire vehicle, paying close attention to the tank and pump to ensure everything is in good working condition.
  • Pressure Level – Always check tank level indicators to maintain the proper pressure level in the tanks

Operating a vacuum truck can be a safe or a very dangerous profession. Performance and productivity is dependent upon how well an operator uses caution while operating the equipment. Proper knowledge about basic safety measures is a vital aid in achieving the successful operation of any equipment purchased from a vacuum truck sale. This safety information is vital to keep this necessary function free from any potential harm!