If someone has recently purchased septic trucks for sale, it is hopeful that they have properly researched this vital job as there are many important things that they need toSeptic_Trucks_For_Sale know in order to effectively and safely operate a septic truck.

Cleaning the septic tank is a critical step in septic system care. Septic tanks must be pumped and cleaned every three to five years depending on the frequency of usage to free them from scum and sludge. Failure to clean the tank on a regular basis is the main cause of septic system failure. Septic tank care should be performed on a consistent basis to prevent damaging the drain field. When speaking about the term “septic tank,” this is a referral to the entire septic system. Of utmost importance is the health and safety concern due to the hazards of a potential collapse of the system which can be deadly.

Cleaning a Septic Tank

If the septic system is not working properly, there is a disruption of the bacteria that thrives naturally and helps in the decomposition of fecal matter. Therefore, septic tank services have step-by-step measures to take in cleaning a septic tank as follows:

  1. Activate the vacuum pump to confirm the suction capacity.
  2. Connect the pumper to a four inch, or longer, vacuum line which will be used to empty the septic tank.
  3. Locate the septic tank and remove the cover.
  4. With the septic tank cover open, perform an initial assessment and begin to break up the floating scum layer and settled sludge layer.
  5. Spread out the vacuum line from the septic truck to the septic tank.
  6. After everything has been set-up, and before the vacuum hose is attached to the septic truck transport tank, the operator must first turn on the vacuum pump. The operator should attempt to listen to the vacuum pump motor to be sure that the machine is properly working.
  7. If everything is correctly functioning, the operator should take out the septic truck tank valve cover and attach the vacuum hose to the septic truck.
  8. After attaching the vacuum hose to the septic truck and with the hose already laid in place, the operator should then start the cleaning process.

Septic Truck Precautionary Measures

When a septic truck operator works alone, they are at risk for asphyxiation. The operator might be injured or may inhale methane gas which can cause dizziness and loss of consciousness. Every worker should have a co-worker to assist and both should pay attention to certain safety warnings as follows:

  1. Avoid leaning over the tank opening as it is possible to inhale toxic fumes coming from the septic tank.
  2. In case the worker falls into the tank, do not attempt to enter the tank to save the person. Instead, call 911 to dispatch EMS. Double fatalities could occur if there is an attempt to save the worker that fell into the tank due to asphyxiation.
  3. Always be vigilant. Septic tank cleaning is potentially hazardous due to cave-ins, collapse and asphyxiation because of toxic fumes that may occur.

Anyone who has purchased septic trucks for sale needs to know that it is essential to know how to work efficiently and effectively on a septic tank system. Operators must also abide by certain procedures for accuracy and proper job performance. By following certain procedures the operator will increase the likelihood of a successful operation. Workers must be aware of vital warning signs to avoid asphyxiation. These are the simple, yet important things to know when operating a septic truck!